Stainless steel submersible water well pump, 10m3/h, 40m deep well
Submersible deep well pumps
SQJ ,SQS,SQY Submersible Pump Series Parameters
SQJ Submersible pumps Parameters:
Flow range10~500m3/h, Lift scope within 5~405m;
Caliber scope 32~203mm, Temperature range-15~80° C.
SQS Bearing submersible pumps Parameters:
Flow range10~250m3/h, Lift scope within 5~12m;
Caliber scope 30~150mm, Temperature range<=30° C.
SQY Oil Immersed submersible pumps Parameters:
Flow range10~100m3/h, Lift scope within 5~54m;
Caliber scope 51~152mm, Temperature range<=40° C.
Product use conditions
1. SQJ Submersible pumps use conditions:
(1)380 V bias voltage does not exceed +/-10% and 50 HZ frequency,
and the deviation is not more than + -1% of the three-phase power
(2) Electrical cavity must be filled with water during operation.
(3)The first-class pump impeller should at least go into a dynamic
water level 2 m below surface. Static pump unit immersed under
water shall not be greater than 70 m in depth.
(4)The normal water temperature should be no higher than 20 ° C,
QJR- hot water pump temperature up to 80 ° C.
(5)Water and sand content (by mass) of not more than 0.01%.
(6)Water PH 6.5-8.5.
(7)The hydrogen sulfide in water content is not more than 1.5 mg /